Garage Door Springs Installation Video



HACKER SAFE certified sites prevent over 99% of hacker crime.

Join our mailing list!



(Your shopping cart is empty)
You are here: Home > Toy Hauler Springs
Toy Hauler Springs

Available in various sizes so please measure correctly to insure proper safe fit and function.

  • Measure the broken spring(s) only
  • Take a measurement of the length, without loops or clips
  • Measure the outside diameter of the spring
  • From the break of the spring, measure the length of 20 coils to the nearest 1/16"
Sort By:
Page of 1
P728 Holmes Garage Door Spring P528 Holmes Garage Door Spring P928 One Piece Garage Door Spring Pair P328C Holmes Garage Door Springs
Today's Price: $32.95
Today's Price: $39.95
Today's Price: $53.95
Today's Price: $59.95
Holmes Garage Door Springs Holmes Garage Door Springs Holmes Garage Door Springs Holmes Garage Door Springs
  • Holmes P728 one piece garage door spring.
  • This is a single one piece spring.
  • There are normally 2 P728 springs on a heavier 2 car 16-foot or larger aluminum one piece garage doors one on each side.
  • There are normally 4 P728 springs on a heavier 2 car 16-foot or larger wood one piece garage doors one on each side.
  • Holmes P728 springs will have an orange sticker and P728 stamped on end of the spring.

  • Specifications:
  • Length Over Coils: 28"
  • Outside Diameter: 1 5/16"
  • Type of Ends: PLUG
  • Wire Diameter & Guage: (.177) #7
  • Initial Tension: 110 - 120
  • Maximum Allowable Stretch: 18.5"
  • ONE Holmes P528 One Piece Garage Door Spring.
  • This single spring is for 7 foot or higher wood garage doors.
  • There are normally "TWO" P528 springs on a wood one piece garage door, one for each side.
  • If you need a pair of springs we offer a discount for the set.

    Specifications:

  • Length Over Coils: 28"
  • Outside Diameter: 1 5/8"
  • Type of Ends: PLUG
  • Wire Diameter & Guage: (.207) #5
  • Initial Tension: 135 - 145
  • Maximum Allowable Stretch: 22"
Holmes P928 one piece garage door springs is for 7 foot or higher Aluminum garage doors. Two springs included. # ONE Holmes P328 One Piece Garage Door Spring.
# Typically a total of two P328 Springs, or one P328 Spring on each side is used for heavier intermediate sized one piece wood garage doors.
# There should be a P328 stamped on the tip of the spring.
P728 One Piece Garage Door Spring Pair P728L Holmes Garage Door Spring (Pair)
Today's Price: $63.95
Today's Price: $63.95
Holmes Garage Door Springs
Holmes P728 one piece garage door springs. There are normally 2 P728 springs on a heavier 2 car 16-foot wide 7 foot high or larger aluminum one piece garage doors one on each side. Two springs included.
  • Holmes P728 one piece garage door spring.
  • This is a single one piece spring.
  • There are normally 2 P728 springs on a heavier 2 car 16-foot or larger aluminum one piece garage doors one on each side.
  • There are normally 4 P728 springs on a heavier 2 car 16-foot or larger wood one piece garage doors one on each side.
  • Holmes P728 springs will have an orange sticker and P728 stamped on end of the spring.

  • Specifications:
  • Length Over Coils: 28"
  • Outside Diameter: 1 5/16"
  • Type of Ends: PLUG
  • Wire Diameter & Guage: (.177) #7
  • L= Low Initial Tension: 75-85#
  • Maximum Allowable Stretch: 18.5"
   
 

Toy Hauler Springs - Parts to Consider

As with anything else, there are various companies that make garage door springs. Some of these manufacturers are more popular than others, and some of them have better reputations than the rest. Toy Hauler happens to be one of those manufacturers that expertly combine craftsmanship with the right strength to get the job done. Contractors that choose Toy Hauler parts often do so due to the durability of the springs themselves. If you are considering replacing you old garage door springs, it makes a lot of sense to look into Toy Hauler Springs.

Toy Hauler springs come in various shapes and sizes. Thus, it is important that you measure your existing springs before purchasing new ones. To do this, make sure to measure only the broken springs. Do not measure any hoops or hooks that might be attached to the spring, and make sure to measure the diameter of the spring as well. This should give you an accurate measurement that you can use to purchase your new set of springs. Aside from the actual measurements, you will also have to know what kind of spring you are shopping for.

There are two basic types of springs to select from: extension and tension. You cannot use the wrong kind of spring on your door, and springs are not interchangeable. So, you’ll have to compare the type of spring that you currently have with a photograph of both types of springs. This way, you will know what type of spring you should purchase. When you decide to purchase your Toy Hauler springs, take the time to double-check those measurements. It never hurts to measure a spring twice, just in case your measurement is off the first time around. If you are in doubt, contact us with any questions that you may have.

You’ll find that Toy Hauler springs are some of the best out there. Not only does this company really stand behind its products, but these springs are also relatively inexpensive. You can replace your own garage door springs if you follow the steps listed above. Remember to measure accurately (without measuring any attachments), exercise caution when removing and repairing springs, and understand the basic differences between tension and extension springs. If you keep these things in mind, you will be able to replace your garage door springs without any help from a contractor – and this will save you lots of time and money!

DiyGaragerepair, Inc.

 About Us
 Become an Affiliate
 Privacy Policy
 Send Us Feedback
 
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © DiyGaragerepair, Inc.. All Rights Reserved.
Sell Online with Volusion.